The MultiClutch attaches between the robot wrist and end effector to protect the end effector and robot in the event of a collision. EOA offers a wide selection of Clutches and Assembly Devices.
DeStaCo EOA Tool Changers
Quick Change Adapters are used where several end effectors are needed in a robot system to extend the usability of the robot by automatically retrieving different end effectors as they become necessary.
DeStaCo Compliance Device
Horizontal Compliance unit enables release or re-centering of tool relative to the robot axis or to the handling arm, with a centering repeatability of 0,02 mm and an angular repeatability of ± 10 mm
Robohand - Tool Changers
End effector tooling can be changed quickly and easily to accommodate many different styles of parts on the same assembly machine. Change over can be automated or for less frequent change over, manual.
Robohand - Compliance Devices
For insertion applications where part positioning may be less than precise. Compliance in torsion, bending and lateral directions allow this devise to compensate for part placing inaccuracies.
Robohand - Lateral Devices
For inserting components that may be laterally misaligned with respect to mating parts. Reduces part jamming which could transmit excessive forces to the robot
